Do It Yourself Garage Door Repair

Repairing your garage door can be dangerous. If you read through this article and have any doubts about your garage door repair safety, contact a professional service. It may save you money to do it yourself and you may enjoy learning a new skill. However, the hospital bills due to injuries sustained in the attempt won’t be worth those savings. Above all, educate yourself thoroughly before attempting any do-it-yourself project to be sure you can complete it safely.

What Type of Door are You Dealing With?
Some garage doors swing up in one piece. Some of them ease across the track in sections. Yours could operate with an electric garage door opener or it could be manual. Consider these factors at the beginning of your project. If your garage door operates with an electric opener, the problem could lay there instead of in the door itself. If you’re having a problem with the door running smoothly on the track and it uses panels, there could be an issue with one of the panels instead of the track. Study your garage door. Be completely aware of how it works. Do your best to determine the problem before you begin because it could be something simple.

Check for Loose Bolts and Screws
There are mounting brackets and hinges that hold the track to the wall and guide the door along the track. These have bolts and screws that secure everything in place. A loose bolt or screw most likely won’t be obvious, so you’ll have to go through them all to be sure that they are tight. While doing this, it’s also a good idea to give the mounting brackets a good cleaning. If you screw them into dirt, that dirt can lodge itself in between the screws and the brackets and loosen them again.

The Track: A Main Part of Garage Door Repair
The track is the part that guides the door up along the ceiling. The track could have accumulated or hardened grease inside of it that makes the door feel rough as it comes up. It could also be misaligned, which could cause the door to stop midway on its path. Inspect the entire track for grease buildup and clean it as you go. After it is clean, check the track with a level to ensure that no areas are misaligned.

Inspect the Door
You know that the track is running properly and that all of the hardware is well in place but the door is still not working correctly. If this is the case, your garage door repair problem is likely with the door itself. Inspect the panels, the windows, and all of the edging on the door. The edge is the part that runs along the track, but if there are breaks in the panels that can cause issues as well. If you have wooden doors, the cracks or breaks could probably be fixed with good wood glue. With other materials, you may have to replace the door or one of the panels.

Please contact TexasLending.com to learn about the options for mortgage and financing your home. Thanks for your interest! In case you're interested in knowing more info on Home appliance repair, stop by www.tophomeappliancerepair.com we provide our member since 2009, every days online 24 hours never stop, so u can register here to get ur account and password situs judi bola check out kratomnesia.com this plant can save your life

Education to Buy Custom Mahogany Solid Doors

We all know mahogany doors and windows are a beauty to possess and a magnificent entry to greet guests but the process to obtain one may be as easy as a sleek fine road or as complicated as a bumpy ride. By dedicating three minutes to this article you will be saving yourself some nasty bumps such as wasted time, stress, and more money.

Deadlines

Deadlines, Deadlines the greatest stress causing factor in construction. From commercial construction to residential construction deadlines apply to all. Custom solid mahogany manufacturers normally require 10-12 weeks to manufacture. Give your self leeway time in case a modification arises or common human errors occur.

Hardware

Order Door Handles and other Hardware ahead of time. As a witness of countless occasions a door handle fit perfectly to introduce the decor style of a home. However, the decorative door hardware and door handle manufacturer required 8 weeks delivery time, too late for that client. For that reason, keep in mind hardware brands vary in delivery time some may take 1 – 2 weeks others as long as 8 – 10 weeks. Check with your provider as it varies per. manufacturer.

Dimensions

Provide accurate dimensions, this one might just save your prized entrance! Dimensions are one aspect you want to have as clear as Mr. Clean’s windows. Any deviations may cost you your custom entrance. In the business of custom windows and entrances a common mistake is giving door slab dimension instead of the masonry opening (MO).

Product Approvals, Tested Material

Make sure your manufacturer holds product approvals for wood doors and windows that are accepted by the building code for your city. Building code approvals is the reason why builders buy from a certain manufacturer. Make certain that your provider holds product control permits, or building code approvals that are accepted by your city. This way the inhabitants will remain protected by tested material, building inspections will be passed swiftly and successfully, and you will avoid product problems such as water infiltration and leaks, product disintegration, and exterior impacts.

Finish

We highly recommend you pick a finish from the manufacturer’s selection of finishes. If you decide to have your own color, request a sample on the manufacturers mahogany before making your final decision on that color, a sample fee may apply. This is because different kinds of wood such as mahogany, oak, and knotty alder absorb outer coats differently.

Installation

Make sure your door installation is performed by personnel who is experienced with this type of job and product. If you want a quick, and successful installation make it your duty to confirm that the installation personnel is experienced and professional with the tools required to install an entry door. Better yet, ask the manufacturer who is recommended or certified by them. The door manufacturer may also recommend a specialized installation company.

At last, maintain and relish your majestic mahogany entryway.

Keeping Your Home Safe With Security Screen Door

Working on the safety of your residence and your loved ones does not need to be expensive. Although CCTVs, high-tech locks and alarm system make great investments on safety, utilizing a security screen door may be all you need to get things right. The good thing about this option is that it is not as costly as the technological solutions.

These items abound in the market and they are quite easy to spot. Nonetheless, purchasing the best one that fits your needs require an educated decision. Educating yourself about them is not that difficult. For one, most of their manufacturers have websites where you can browse through all the details you need. Secondly, sellers would be more than willing to answer your questions about these doors should you decide to drop by their stores.

You may not believe this but working with home security doors – this range from their purchase to their installation – could be as easy as pie. Do you have limited budget? Fret not as varied models are available at different prices. With ample research, you can stumble upon the right match to your money. Can’t afford to pay for installers? For your information, do-it-yourself installation is possible regardless of your expertise level. There simply are corresponding literature that comes with the package.

Perhaps, you have not seen one yet and you are in doubt about its dependability. Here is a quick description. Its appearance is similar to a typical door with screen. The noticeable difference would be its size and quality. It is much bigger and sturdier. Metal is the primary material used in its manufacture. It even has an additional safety feature in the form of outside grills. These grills are formed out of cast iron or steel. Moreover, these grills are attached just right in front the mesh or screen. In addition to the grills, a typical security screen door possesses a peep-hole. This a small gadget installed on the door. It allows you to see who is knocking or standing by your entry way without you having to open the door.

Before rushing to the nearest store to place a purchase, work on the measurements first. Acquire the dimensions of the door frame and the door opening. Always start with top part and then work down to the lower. Let a sales agent help you with the selection when you are in doubt of your judgment. As you take your purchase home, ensure that the mounting hardware is included. Got no installation tools back home? You might want to purchase them right then and there too.

Besides being affordable, a security screen door is easy to maintain. Nonetheless, proper handling is needed to make it last longer than expected. Even though it is bigger and a bit heavier than regular doors, it is convenient to use. For added safety, be aware of the practical measures on keeping evil doers at bay. For one, you must keep entry and exit ways locked.

Cabinet Door Hinges – Selecting the Right Ones for You

Choosing the material your cabinet doors are to be made of may seem like a difficult task. There are various types of wood, metal, plastic and glass to choose from. While you may not have a problem deciding if you want metal, glass, wood or plastic, it may be the more detailed decisions that slow you down.

For kitchens many people want wood. But they aren’t sure what kind of wood to get. First, do you want solid wood or a lighter wood? Part of the decision in this will be weight. The other will be price. To get cabinets of oak, cherry or other very solid woods, you are going to have to make sure you have cabinet door hinges and other hardware pieces that can handle them.

Additionally, solid wood cabinets, especially the more exotic woods, have a price tag to go with the quality of the wood. They are more expensive than some of the other cabinetry options.

If you don’t want the larger cabinet door hinges and other hardware pieces that will be necessary to hold those heavier doors up, you may have to settle for a different kind of wood. Many cabinets are made of woods like plywood and particleboard. I know what you’re thinking. A lot of people immediately draw back hearing of cabinets made this way, but you have to give it a chance. We’re not talking about a rough cut piece of plywood that’s stuck to a door frame. We’re talking about a piece of wood cut to the perfect shape and either finished and stained or veneered to give off a sufficiently classy look to your cabinetry.

There are a lot of pros to these kinds of cabinets. First, they are generally lighter than some of the thicker, solid wood cabinets. That means you get more selection in your cabinet door hinges and can move out of the industrial, heavy-weight cabinet door hinges that you would have to use on a set of big cherry cabinet doors, and instead use more decorative cabinet door hinges to even add an extra air of style to your cabinetry.

When it comes to particleboard many people worry that it’s not strong enough to hold up to daily usage and that the cabinet door hinges will pop off, ripping a hole in the board when they go. This is how things used to be. Sure, there was a time when particleboard was not made as sturdy as it should have been. But not any more. These days, particleboard is made in a similar fashion to the old days, with chips of wood and glue, formed into board shape, but they’re built better. Instead of just having the strength and feel of wood, you have the stronger adhesives than used to be employed, that are actually going to reinforce the piece. Particle board these days holds up to the same strain as it’s solid brothers, and has become a new and more durable solution for cabinetry.

Now that you’ve educated yourself a little more about the materials behind cabinetry, it’s time to start shopping, and find the ones that are the perfect fit for your home.

4 Steps to Replacing Garage Door Springs

Picture this if you will – it’s early in the AM hours you’re out cold. Suddenly, a loud crash wakes you from your deep sleep. You spring up and out of bed to find the source of the noise? Has the zombie apocalypse begun? Are Charlie Sheen and Emilo Estevez really delinquent garbage men? Or is Michael Bay and his ‘splosions in town filming Transformers 3?

None of the above. Perhaps you were just in a deep sleep. After looking through the house with a quick crusted eye once over, you decide to head back to the warm and cozy bed.

It isn’t until you’ve exhausted your snooze button that morning, now in mad rush to get yourself and children ready for work and school. Racing against the clock, you manage to get yourself and rat pack together as you scurry in a frenzy through the garage and into your car. But now your garage door doesn’t open. You feverishly push the remote button with your first reaction being that the batteries must be dead. That’s when all the pieces finally come together. The noise the woke you earlier that morning before the nagging electric buzzer on the clock radio. The noise you thought was part of your comatose state was actually a reality when you notice that the noise you heard was the snapping of your garage door spring.

Of all the days (chances are this was a Monday because everything that sucks usually happens on a Monday… not to mention that Mondays just suck in general), your garage door spring breaks and you find yourself and your kids trapped in the garage. Now the panic starts to set in as you wonder how you’ll ever be able to get them to school and yourself to work. Not mention that this dilemma has pretty much immobilized you, your means of transportation to get ANYWHERE is now trapped in. In that instant, you may feel like the world is crashing down on you, and just you alone. Before you beat yourself up and start to repeatedly question, “Why me?”, you should first know that garage door springs are one of the most called on repairs in the industry.

Garage door springs support the entire weight of the door. The springs are wound or stretched under pressure, tightening and loosening as you open and close the door. It’s the door springs and not just the door opener that supports and lifts 300 plus pounds of weight of the door.. Like anything else under pressure, eventually your springs WILL break. So in the event that you find yourself int his little predicament, what do you do?

Here’s my recommended “4- Step Process for Repairing Your Garage Door Springs:

Step 1 – Get Your Car Out of The Garage

You must be saying to yourself, “If I could get my car out of the garage, I wouldn’t have a problem”. If you’re saying this, you’re naturally speaking from frustration. The best way to get through a situation like this is to keep yourself level-headed and look for quick solutions that will allow you to continue your normal way of living without being interrupted by this common event. Just because your garage door springs have busted, doesn’t mean that you don’t have use of the garage door. It is still on track with its rollers and can be manually operated.

Pull the red emergency release cord located above the door to enable you to manually lift the door. Remember that the garage door is a heavy object, and even heavier without the support of the spring which would normally neutralize the weight. If it’s too heavy to lift yourself, have someone else help you. If you accidentally drop the door while you are manually lifting, DO NOT try and stop it with your foot. Dropping a 300 pound door on your foot or any other body part is bound to ruin your day.

Step 2 – Identify Your Spring

Identify which type of spring you have: Extension or Torsion. Torsion and Extension springs exert a force equal to the weight of your garage door. This counter balances the 200 to 300 pound door, rendering it weight neutral so it can easily be opened.

A Torsion spring runs across a bar at the top of the inside of the door. The spring is wound and under immense tension. It’s the tension of torsion spring that lifts the weight of the garage door.

Extension springs are found on either side of the door. These springs act like big steel rubber bands, stretching as the door is lowered.

Step 3 – Buy New Springs

Now that you know what type of spring you have, you need to purchase new ones. You’ll want to replace all of your garage door springs at the same time. Having undergone similar aging and weathering, one broken garage door spring is a sign that the second one is about to break soon. There’s no logical reason to fix one spring at a time and just wait for the other one to break, unless you enjoy the headaches and hassles.

Also, having one old spring and one new spring will throw off the balance of your garage door. You ‘ll also burn out the motor on your garage door opener and have even more problems. You can find and purchase new garage door springs at your local hardware store, such as Home Depot or Lowes. Prices will vary depending on the type of spring size, quality, coating and cycles.

Size – You’ll need to measure your existing spring to know exactly what size replacement you’ll need. There are 4 accurate measures you’re going to need: (1) Wind Direction (2)Wire Size (3) Diameter – Torsion springs measure inside diameter and extension springs measure outside diameter (4) The Overall Length of the Spring.

Coating – Is it galvanized, powder coated or oil tempered? Which is going to resist rust the longest?

Step 4 – Installation

Installing your new garage door springs is not only a lengthy and complicated process, but potentially dangerous. You have got to remember that the garage door springs are wound up with more tension than Steve Carell as the 40-Year Old Virgin. The slightest mistake or mis-calibration could be a deadly one.

9 times out of 10, homeowners will find the task of repairing or replacing garage door springs too complicated, if not too dangerous. Most people don’t have the time or inclination to replace or repair the broken spring themselves. If that sounds like you, your best option would be to contact a professional technician. It will also save you the time in measuring and shopping for the right springs.

Hopefully, this information will not only help you and your family have a safe and happy summer, but will also keep you prepared and well-educated in the instance that this occurs any time of the year!

Garage Door Springs, The Danger Zone

Usually, the largest mechanical thing around your house is the overhead garage door – the one you’re driving your car through, sometimes without even opening it – I know that you do :-) .

The major, and the most dangerous componnent of the overhead door is the garage door spring – (or springs depending on the design), which supports the entire weight of the door panels (sometimes over 400 pounds) and helps you to lift / lower the entire door assembly. I have personally installed 3 overhead garage doors with 2 different types of springs, and you do have to trust me on that – garage door springs are under enormous pressure and you can get seriously injured or even killed when performing such work. If you decide to take your chances – it is imperative that you follow instructions to the last detail! Even if you have a friend or a professional doing it for you, read it and check everything after the installer finishes the job. The garage overhead doors have no safety brakes (at least I haven’t heard about any), that would prevent it from falling down when the supporting spring fails. I’ve found some US patents for such devices, but apparently none of them were ever implemented into an actual garage door.

According to the US Consumer Product Safety Commission, garage overhead door related accidents account for thousands of injuries every year (average of 30000 per year). For example, these injuries are: fractures, crushings and amputations. It is believed that not all injuries are reported in the United States . (CPSC)

There are basically two types of the garage door spring systems utilizing tracks / side rails (at least these are the most common types in Illinois and probably the rest of US):

1. garage door torsion spring(s) which are wound-up on a rod above the garage door opening top section ( door header)

2. garage door extension springs that are attached on either side of the door and stretch along the horizontal part of the track when the door is closed

You might also have an old, one piece door that swings outward as it goes up and overhead. This particular design will have springs mounted on the sides of the door opening – at about your waist height, secured to a lever bracket system that extends the springs toward the ceiling at the door closing. It is an old and extremely dangerous system, not manufactured anymore. If you have such a system in the garage, I’d highly recommend replacing it.

Garage door torsion springs – there are either single or double spring designs. The spring will usually break while under the maximum stress which is when the overhead garage door closes / travels down, or it is already completely closed (USUALLY). If you’re closing it manually and it happens during this operation, don’t try to prevent it from crushing down, let it go … well, unless your foot is where the door will slam!

When one of the two garage door springs breaks you need to have them both replaced at the same time! It will cost some extra money, but having an old and new spring installed will:

- put much more stress on the new one

- the door will loose proper balance

- the remaining old garage door spring will most likely break soon

Torsion springs for residential overhead garage doors have anywhere between 5000 – 30000 cycles life span. Those digits represent an average total number of times you should be able to open and close your door before anticipating garage door spring replacement.

Garage door extension springs – you might have either one or two on each side of your overhead garage door A critical issue with those springs is to have a safety cable installed inside of each single spring and secured properly, so when the door opens and closes, the spring can freely slide on this cable! When the garage door spring snaps without the cable inside, broken ends might severely injure anyone standing within their range. The cables should be always included with the overhead garage doors hardware (assuming that they came equipped with extension springs), but A LOT OF PEOPLE either forget to install them, or don’t read instructions and maybe assume that they are not required. Unlike the torsion spring, which doesn’t really show any visual wear until it breaks, extension spring wear is much easier to spot, because they simply change dimensions: the coils are over-stretched (best visible when the garage door is open). If you notice such a behavior on your garage door springs – it’s time for a replacement.

And for both types of the garage door springs – their tension should be evenly adjusted (on a two spring system) so the overhead door travels properly in its tracks – to test it, stop the door slightly above the garage floor (1″ or two) and make sure that its bottom / top edge are perfectly horizontal. Measuring the gap along the bottom might not be the best way to confirm that, because the garage floors are often out of level. Placing a level somewhere in the center section of the garage door top edge would give you the best readout (remember that the door should not be closed completely!). When the springs are properly adjusted, you should be able to raise and stop the garage door at any height, and it should stay at this level without any assistance ( garage door opener arm disconnected).

Important things to remember:

1. Check the rollers / hinges, cables, and the overhead garage door springsoften to ensure they are in good working condition

2. Educate your children about garage door safety

3. Never leave children and disabled persons unattended near or in a garage door path

4. Keep your body clear of the door path when closing

5. Don’t leave a personal property underneath an open garage door

6. Read more about the garage door opener and other garage components